Description

Primed for Performance, the R2-500X4 is a 500 watt, full-range Class-D amplifier capable of operating at 4Ω or 2Ω stereo and 4Ω bridged/mono. This amplifier is extremely efficient because of its Class-D technology which reduces demand on the vehicles electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. supply that generates more power as voltage increases.

Specifications

• CEA-2006 Compliant
• CEA-2006 Power Rating = 75W x 4 @ 4Ω
• ≤1.0% THD+N
• Number of Channels = 4
• Total Power (Sum of Rated Power) 500 Watts
• Rated Power (RMS ) 75 Watts x 4 @ 4Ω / 125 Watts x 4 @ 2Ω / 250 Watts x 2 @ 4Ω Bridged/Mono
• Dynamic Power (PVC/PowerCube®) 90 Watts x 4 @ 4Ω / 160 Watts x 4 @ 2Ω / 300 Watts x 2 @ 4Ω Bridged/Mono
• Bridgeable = Yes
• Frequency Response 20 Hz – 20 kHz
• Input Sensitivity Low-Level: 150 mV – 4 V / High-Level: 450 mV – 12 V
• Circuit Topology Class D
• Total Harmonic Distortion (THD+Noise) Front/Rear 4Ω: <1.0% / Front/Rear 2Ω: <1.0%
• Signal Input Front Low-Level: 2 RCA / Front High-Level: 4-Pin Molex / Rear Low-Level: 2 RCA / Rear High-Level: 4-Pin Molex
• Signal Output: Low-Level 2 RCA (Pass-Thru active with RCA or Hi-Level input)
• Tone Controls = No
• Crossover Controls Front High-Pass: 50 Hz – 250 Hz @ 12dB/Octave Butterworth / Front Low-Pass: 50 Hz – 250 Hz @ 12dB/Octave Butterworth / Rear
• High-Pass: 50 Hz – 250 Hz @ 12dB/Octave Butterworth / Rear Low-Pass: 50 Hz – 250 Hz @ 12dB/Octave Butterworth
• Visual Indicators Power/Protect / C.L.E.A.N. In / C.L.E.A.N. Out (front) / C.L.E.A.N. Out (rear) / C.L.E.A.N. Out (sub)
• Power Wire Gauge 4 AWG
• Power Input Connector Compression Terminal Block
• Speaker Wire Gauge 8 AWG
• Speaker Output Connector Compression Terminal Block
• Operating Voltage 9 – 16 VDC
• Recommended Fuse (not included) 80 A
• Max. Current Draw (13.8V Sinewave) 71 A
• Dimensions (H x W x D) 1.9″ x 6.8″ x 10.1″ (4.9 cm x 17.3 cm x 25.5 cm)