Description

Primed for Performance, the R2-750X5 is a 750 watt rated, full-range class-D amplifier capable of operating at 4Ω or 2Ω stereo with a mono subwoofer channel that can be run at 4Ω or 2Ω. The front/rear stereo channels can also be run at a 4Ω bridged/mono load. This amplifier is extremely efficient because of its Class-D technology which reduces demand on the vehicles electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. supply that generates more dynamic power as voltage increases, and an integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass

Specifications

• CEA-2006 Compliant
• CEA-2006 Power Rating = 50W x 4 + 200W x 1 @ 4Ω
• ≤1.0% THD+N
• Number of Channels = 5
• Total Power (Sum of Rated Power) 750 Watts
• Rated Power (RMS ) 50 Watts x 4 + 200 Watts x 1 @ 4Ω / 100 Watts x 4 + 350 Watts x 1 @ 2Ω / 200 Watts x 2 + N/A @ 4Ω Bridged/Mono
• Dynamic Power (PVC/PowerCube®) 70 Watts x 4 + 241 Watts x 1 @ 4Ω / 114 Watts x 4 + 426 Watts x 1 @ 2Ω / 234 Watts x 2 + N/A @ 4Ω Bridged/Mono
• Bridgeable Yes
• Frequency Response 20 Hz – 20 kHz
• Input Sensitivity Low-Level: 150 mV – 4 V / High-Level: 450 mV – 12 V
• Circuit Topology Class D
• Total Harmonic Distortion (THD+Noise) Front/Rear 4Ω: <1.0% / Front/Rear 2Ω: <1.0% / Sub 4Ω: <1.0% / Sub 2Ω: <1.0%
• Signal Input Front Low-Level: 2 RCA / Front High-Level: 4-Pin Molex / Rear Low-Level: 2 RCA / Rear High-Level: 4-Pin Molex / Sub Low-Level: 2 RCA /
• Sub High-Level: 4-Pin Molex
• Signal Output N/A
• Tone Controls 0 to +18 dB @ 45 Hz
• Crossover Controls Front High-Pass: 50 Hz – 250 Hz @ 12dB/Octave Butterworth / Front Low-Pass: 50 Hz – 250 Hz @ 12dB/Octave Butterworth / Rear
• High-Pass: 50 Hz – 250 Hz @ 12dB/Octave Butterworth / Rear Low-Pass: 50 Hz – 250 Hz @ 12dB/Octave Butterworth / Sub Low-Pass: 50 Hz – 250 Hz @
• 12dB/Octave Butterworth / Sub Infrasonic: 15 Hz – 40 Hz @ 12dB/Octave Butterworth
• Remote Control (Mono Channel)
• Visual Indicators Power/Protect / C.L.E.A.N. In / C.L.E.A.N. Out (front) / C.L.E.A.N. Out (rear) / C.L.E.A.N. Out (sub)
• Power Wire Gauge 4 AWG
• Power Input Connector Compression Terminal Block
• Speaker Wire Gauge 8 AWG
• Speaker Output Connector Compression Terminal Block
• Operating Voltage 9 – 16 VDC
• Recommended Fuse (not included) 120 A
• Average Current Draw (13.8V Music)
• Max. Current Draw (13.8V Sinewave) 71 A
• Dimensions (H x W x D) 1.9″ x 6.8″ x 11.2″ (4.9 cm x 17.3 cm x 28.5 cm)