Description

Suits 2016-2021 200 Series Landcruiser 

Four functions within the single OBD module that is fully 100% direct plug & play no splicing into the vehicles wires required.

Functions:

Windows close: Press lock on original vehicles remote any open windows will close consecutively (some production years all windows will close at the
same time).

Windows open: With all windows completely closed press unlock three times (unlock, unlock, unlock) on the original vehicles remote windows will open consecutively (some production years all windows will open at the same time).

Mirrors close (folded in): When all doors are closed and the vehicle is locked (vehicle must have factory electric folding mirrors).

Mirrors open (folded out): When vehicle is unlocked (vehicle must have factory electric folding mirrors).

Doors lock: With ignition on when the gear selector is moved from P (Park) to D (Drive) doors will be locked automatically.

Doors unlock: With ignition on when the gear selector is moved from D (Drive) to P (Park) doors will be unlocked automatically.

Installation:

Remove the lower trim around the bottom of the steering column, by first removing three Phillips screws. One is located under the column.

The other two are located one each side facing the steering wheel, to gain access to theses the steering wheel will need to be turned and each screw removed individually.

With the vehicles ignition in the off position and the key removed from the ignition (if applicable) remove the lower trim by depressing each side slightly and pulling down (the upper trim is not required to be removed).

Connect the five pin patch harness to the corresponding connectors within the underside of the exposed column , ensuring the OBD module is securely fitted and away from any moving objects.

Replace trim and Philips screws.

NOTE: Do not remove the OBD module when the windows or mirrors are in operation or when the vehicles ignition is on.

To remove OBD ensure vehicles ignition is off and the key removed (if applicable) from the ignition before final removal.

Programing of options are available